Blocked Drains Plumber: Tips for Dealing with a Clog
Whether you’re dealing with a slow drain or a clog, you need to know how to clear your drain. Here are 10 tips for dealing with a clog.
- Don’t Use Chemical Drain Cleaners
Chemical drain cleaners are harsh and can damage your pipes. Instead, use a drain snake or plunger to clear your drain. Each drain cleaner has different instructions, so be sure to read the instructions before you use any drain cleaner. A strainer should be placed over all the drains to gather particles that would just get in the drain and potentially cause stoppage. You should clean your strainer in your kitchen anytime you have anything in it.
- Use a Drain Snake
A drain snake is a long, flexible rod that you insert into your drain to remove clogs. Drain snakes are available at most hardware stores.
- Use a Plunger
A plunger can also be used to clear clogs. To use a Blocked Drains Plumber Melbourne, fill your sink with enough water to cover the plunger. Place the plunger over the drain and push and pull the plunger up and down. The suction from the plunger will help to push the clog through the drain. To use a drain snake, insert the drain snake into the drain and turn the crank. The drain snake will grab the clog and pull it through the drain. If none of these methods work, you can remove the drain cover and use a wire hanger to reach the clog.
- Remove the P-Trap
The P-trap is the curved portion of your drain pipe under your sink. To remove the P-trap, unscrew the nuts that hold it in place. Be sure to place a bucket under the P-trap before removing it to catch any water that may spill out.
- Clean the P-Trap
Once the P-trap is removed, clean it out with a wire brush. If the P-trap is clogged with hair, you may need to use a plunger to remove the clog.
- Clean the Drain Pipe
Use a wire brush to clean the drain pipe. If the drain pipe is clogged with hair, you may need to use a plunger to remove the clog. Drain pipes can become clogged with hair, soap scum, and other debris. Use a wire brush to clean the drain pipe.
- Replace the P-Trap
Once the P-trap is clean, replace it and screw the nuts back in place.
- Run Hot Water
Once the P-trap is replaced, run hot water down the drain to flush out any remaining debris.
- Use Baking Soda and Vinegar
Baking soda and vinegar can also be used to clear clogs. To use this method, pour a cup of baking soda down your drain. Follow the baking soda with a cup of vinegar. Cover the drain with a plug and let the mixture sit for 30 minutes. After 30 minutes, flush the drain with hot water.
- Call a Plumber
If you’ve tried all of the above methods and your drain is still clogged, it’s time to call a plumber. A plumber will be able to quickly and easily clear your drain.